亚克力门板磨边机_亚克力抛光机_有机玻璃钻石抛光机-山东机械多少钱一台
全国咨询热线:13313028229
当前位置:首页>>新闻资讯

直线磨边机(直边机、圆边机、斜边机

网址:www.tjpolishing.com时间:2024-03-19 15:46:58(部分内容来源于网络,不代表本站观点)

The working mode of linear edging machine (straight edge machine, round edge machine, bevel edge machine) is to grind the glass by clamping the front and back press plate and driving its linear movement.
直线磨边机(直边机、圆边机、斜边机)的工作方式都是通过前后压板夹紧玻璃并带动其直线运动进行磨削的.

Two points must be paid attention to in use :① The combination surface of the front and back pressure plate and the guide rail should be lubricated frequently, otherwise the normal service life of the machine will be affected by premature wear of the front and back pressure plate and the working surface of the guide rail.
使用中一定要注意两点:①前后压板与导轨结合面要经常加油润滑,否则会由于前后压板及导轨工作面的过早磨损而影响机器的正常使用寿命.

Although some models have automatic lubrication devices, it is necessary to regularly check whether the lubrication pipeline is smooth;
有些机型虽有自动润滑装置,但也要经常检查润滑管路是否畅通;

When clamping the glass, the clamping force should be appropriate, too loose affects the grinding quality, too tight will increase the machine load, easy to produce shaking crawling phenomenon, and easy to crush the glass when grinding thin glass.
②夹紧玻璃时夹紧力大小要适当,太松影响磨削质量,太紧会使机器负荷增大,易产生抖动爬行现象,磨薄玻璃时还容易夹碎玻璃.

The size of the clamping force can be tested by clamping a slightly larger glass on the machine, that is, the glass is clamped in the middle of the machine, the hands are forced to move the glass in the shutdown state, and the clamping force is adjusted to just when the hands can not move.
夹紧力大小可用一块稍大的玻璃夹在机器上进行测试,即:将玻璃夹在机器中部,停机状态下双手用力板动玻璃,感觉夹紧力调到刚好双手搬不动时为合适.

微信扫一扫

在线客服
联系方式

咨询热线

13313028229

微信

13313028229

上班时间

周一到周六8:30-5:00

二维码
线