输送链致使水平不平。
The conveyor chain at the inlet end of the glass and
the conveyor chain at the outlet end of the glass are not in a straight
line (not level) with the front and back platen.
进玻璃一头输送链以及出玻璃一头输送链与前、后压板不在一条直线(不水平)。
First
adjust the height of the guide rail at the end of the glass (can be
completed by adjusting the travel screw rod below the guide rail),
首要调理进玻璃一头的导轨高度(可通过调理导轨下方的行程螺丝丝杆完成)，
The
2500 long glass can be uploaded through the conveyor chain attached to
the guide rail from beginning to end when edging (pay attention to
investigate two places after the glass has been 40CM into the pressure
transfer plate: the glass on the conveyor chain under the pressure
transfer plate and the glass on the conveyor chain on the far right of
the machine is still attached to the conveyor chain),
使2500长玻璃在磨边时能够从始至终贴在导轨的输送链上载送过(在玻璃进到压传板40CM后留意调查两个当地:压传板下方的输送链上的玻璃以及机器最右边的输送链上的玻璃是不是仍是贴在输送链上面)，
If
the glass on the conveyor chain under the pressure transfer plate is
lifted out of the conveyor chain, it is necessary to lower the guide
rail travel screw on the right frame A to the flat stop;
假设压传板下方的输送链上的玻璃脱离的输送链而腾空提起，则需下降右边A字架上的导轨行程螺丝到平停止;
Assuming
that the glass tail of the conveyor chain on the far right of the
machine is tilted (vacated), the guide rail travel screw on the right
A-frame is raised to A flat stop.
假设机器最右边的输送链上的玻璃尾部翘起(腾空)，则需求升高右边A字架上的导轨行程螺丝到平停止。
(3) Foundation soft formation.
(3)地基松软形成。
The cement foundation without tamping can not accept the host's own weight, so that the host sinks, resulting in uneven.
没有通过夯实的水泥地基不能接受主机自身的自重，使主机下沉，致使不平。
We need to tamp the foundation and flatten the fuselage.
需求夯实地基，垫平机身。
(4) The glass support foot is not fixed.
(4)玻璃支架脚没有固定形成。
When grinding large glass, it is very simple to shift, resulting in a difference in level.
在磨大玻璃时很简单发生移位，致使水平有区别。
